Cerastus Knight-Acheron on Experimental Base

Picked up a Cerastus Knight-Acheron from eBay and it didn’t come with a base so after taking some measurements with my calipers, I threw together a model in Sketchup Make that seems to be a pretty good base for my new wargaming model. I also incorporated a rock into the model thinking I could have my Cerastus Knight-Acheron stepping off of it. The rock was a bit small so instead I glued the Knight in a way that it remains very dynamic and looks like hes about to kick the rock into outer space. Who needs planetary defence forces, am I right?)

Archeron Base with Rock

Archeron Base with Rock

Archeron Dynamic Pose

Archeron Dynamic Pose

Archeron Strutting

Archeron Strutting

Archeron Walking to the Left

Archeron Walking to the Left

Facebooktwitterredditpinterestby feather

New (3D Printed) Weapons for New Knights

Now that I’ve taken a lovely long look at the new Imperial Knight wargear, I’ve decided to 3D print some of the new goodies. Now $157 per Knight may be doable for some folks but I’m currently still looking for work so I decided to break out the old Google Sketchup and 3D printer to design some of my own weapons.

I threw together an Avenger Gatling Cannon first followed by the two carapace rocket pods. I plan on attempting to design a Thunderstrike Gauntlet but that seems a little beyond both my skills as a 3D modeler as well as my 3D printer’s abilities. I would like to design a Twin Icarus Autocannon but I may forego that since I plan on eventually getting quite a few Onager Dunecrawlers and I will make a conversion out of their Autocannon bits.

New Knight Weapons

New Knight Weapons

I will post better pictures of the Gatling Cannon in the future. (After I print my MkII version which has more details and will be printed at a better resolution.)

Knight with A Fancy Hat

Knight with A Fancy Hat

Dat Rocket Pod

Dat Rocket Pod

Alternate view of Stormspear Rocket Pod

Alternate view of Stormspear Rocket Pod

Make sure to check out my Etsy store and pick up a set of 3D printed game markers!

Facebooktwitterredditpinterestby feather

New Objective Markers Part 2

So Rainy Day Games runs a monthly Warhammer 40K league and they make heavy use of objective markers both Tacical (1-6) as well as Eternal War (1, 2, 2, 3, 3, 4).

I’ve 3D printed objective markers before but I wanted a more complete set so I designed and 3D printed out a set of 1-6 as well as an “R” for the relic and an additional 2 and 3 for missions that require them. Additionally I designed and 3D printed some 40mm bases for the 25mm markers to sit into.

You can’t really see what is going on with these as they aren’t painted yet.

Unpainted 25mm

Unpainted 25mm

Unpainted 40mm

Unpainted 40mm

There you go.

Painted 25mm

Painted 25mm

Painted 40mm

Painted 40mm

And finally some closeup money shots.

Combined Base

Combined Base

Brick Base

Brick Base

Marker Base

Marker Base

Facebooktwitterredditpinterestby feather

Objective Markers Part 1

So I just added these to the Etsy Shop.

Clicking the top image below will take you to the Etsy page.

So I’ve been getting back into the hobby in a big way and I decided to start with some Objective Markers.

These are very utilitarian and soon (Read: Monday) I will post about the more artsy markers I also designed and painted. They will seem very familiar to some of you who followed this blog a while ago and I hope the new ones are as well received ad the last few sets I’ve made.

Meanwhile, this post revolves around the markers I designed and have been printing out sets of all day. They can hold a pair of rounded 12mm dice and are 40mm in diameter.

Objective Markers on Parade

Objective Markers on Parade

Objective Markers with Many Uses

Objective Markers with Many Uses

I’ve already sold a set of 6 to a new friend over at Rainy Day Games and I hope to see them on the battlefield on Sunday’s league games.

Facebooktwitterredditpinterestby feather

Valkyrie Conversion

Recently I’ve been 3D printing conversion parts for a pair of Valkyries I’m hoping to bring to a tournament soon. I really like the aesthetic of twin turbines for wings instead of the static wings that come with the kit so that’s what I’ve been working on. I recently posted this conversion on my Etsy store. On top of that, an article over at 3DPrintingIndustry.com was written up about my (then) unfinished conversion.

I ran some LEDs through the ducts in the wings and wired them inside of the plane. This is my first conversion with electronics involved and it was all very straightforward.

V1 Freshly Printed Wing

V1 Freshly Printed Wing

V1 Painted up a wing to see the layers from the print better

V1 Painted up a wing to see the layers from the print better

V1 Dryfitting the wing to the plane

V1 Dryfitting the wing to the plane

V2 Final dryfitting

V2 Final dryfitting

Soldering up some LEDs

Soldering up some LEDs

Lighting up the LEDs

Lighting up the LEDs

LEDs on and installed

LEDs on and installed

LEDs on and installed

LEDs on and installed

LEDs on and installed in the dark

LEDs on and installed in the dark

LEDs on and installed in the dark

LEDs on and installed in the dark

LEDs on and installed in the dark

LEDs on and installed in the dark

Facebooktwitterredditpinterestby feather

Imperial Knights (and Sabres)

First things first. I’ve printed out some Sabre Defense platforms with my 3D printer

Sabre Defense Platforms

Sabre Defense Platforms

And primed them:

Sabre Defense Platforms

Sabre Defense Platforms

Next, I’ve put together four Imperial Knights for the next 1850pts tournament I am entering. I based their paint scheme on the Lannister armour from Game of Thrones.

Father coming home from the maternity ward

Father coming home from the maternity ward

We got Legs

We got Legs

Torsos!

Torsos!

Parts

Parts

Getting ready for paint

Getting ready for paint

Bling Bling

Bling Bling

Fearless Leader

Fearless Leader

Preparing the armour

Preparing the armour

Facebooktwitterredditpinterestby feather

Scratch Built Warhammer 40K Titan #oneweekproject

So some of you may remember my 30 Points of Cryx in 3 Days Challenge about a year ago. Recently I obtained a 3D printer and I’ve given myself a new challenge: a table-top quality Warhammer 40K Battle Titan in one week.

Now this titan is far from done. As I type this I am re-printing a failed foot/pod-thing where the first one printed very poorly and the quality, I feel, was unacceptable. As a matter of fact, I doubt the beast will be finished by the Apocalypse game this Saturday (32 hours from now), but I still feel it’s worth fielding and should still be an awesome site to see.

I’ve been 3D modeling the next piece of the Titan as I’m printing out the previous piece.

I started with the leg pods. As I scoured the internet looking for reference materials I found a lon of silhouetted images of titans with stepped legs, so that’s what I started with first. With my design, you just fit the center ring onto the bottom of the knee cap PVC (45 degree elbow coupling) and the rest of the layers drape down from that.

Telescoping Legs Model

Telescoping Legs Model

The next thing I did was start designing the brackets and such to fit around the legs and designed knee pads to be glued to the brackets. I found a 3D model on Thingiverse with the Adeptus Mechanicus icon and joined it with one of the kneepads.

Adeptus Mechanicus knee pad

Adeptus Mechanicus knee pad

Some Facebook friends from my local gaming club’s page gave me some inspiration for designing the two primary weapons for the Titan.

The Vulcan Megabolter.

Megabolter Sketch Up

Megabolter Sketch Up

And

The Plasma Annihilator

Plasma Annihilator Sketch Up

Plasma Annihilator Sketch Up


Here are some progress pictures ranging from Dec. 1st up until now.

Titan legs dry fit

Titan legs dry fit

MOAR PVC

MOAR PVC

First face (Iron Man)

First face (Iron Man)

Foot-pod-thing

Foot-pod-thing

`Leg brackets

Leg brackets

Plasma Annihilator dry fit

Plasma Annihilator dry fit

Megabolter Cartridge Ejection

Megabolter Cartridge Ejection

Megabolter Main Body Print Complete (Almost 10 hours)

Megabolter Main Body Print Complete (Almost 10 hours)

Megabolter dry fit

Megabolter dry fit

Megabolter dry fit

Megabolter dry fit

Titan dry fit (second face)

Titan dry fit (second face)

Lighting effects using EL cable

Lighting effects using EL cable

Lighting effects using EL cable

Lighting effects using EL cable

Vulcan Megabolter 90% finished

Vulcan Megabolter 90% finished

I decided against the Iron Man face plate for two reasons. First, I thought it would be a pain in the ass to attach to the PVC in a way I would be happy with. Secondly, I though it would be too iconic and recognizable. Not that there is anything wrong with that, I just want this a little more generic and Warhammer 40K-ish.

I recently decided against me second face choice because I feel its a little too plain and , again, it needs to be more fierce and Warhammer-y.

So I think I’s finally decided to go with my third option and I’m going to be printing out the lower half of the Predator face mask. Again, I found a model on Thingiverse that I think will go well.

Facebooktwitterredditpinterestby feather

3D Printing Conversion Bits

So A few weeks ago, I decided to get into 3D printing and I bought a 3D printer on amazon.com. It seemed good for the price and people were giving it a great review (again for the price).

Sadly, the printer never showed up and seemed to get lost in the mail. I ordered another one.

Again, the printer got lost in the mail. Evidently, at least in my experience, these things fall off trucks. Like… a lot.

So I finally bit the bullet and decided to go the “generic rip off” way of things and picked up the same model and make as the printer I bought before, only without the logos and marketing and picked a Chinese knockoff on eBay for around 70% what I paid on Amazon (twice).

I have to tell you: it… is… amazing.

With no trouble at all I got the thing unpacked, leveled, aligned, calibrated and printing like a boss!

Here I am printing a black cube for funsies:

After the cube I printed the tank top conversion bit I’ve been working on in SketchUp Make for a while.

After cleaning up the bit. I placed it onto one of my Sister of Battle Adepta Sororitas Rhinos to convert it to an Immolator.

Tank Top Conversion

Tank Top Conversion

Last but not least, now I am printing out 4 more tank tops for my other rhinos. Looks to be about a 9 and a half hour long build.

Four Tank Tops

Four Tank Tops

Facebooktwitterredditpinterestby feather